GroHome
GardeningHome DecorOutdoor LivingHome ImprovementSustainable LivingAll guidesAbout
Outdoor Living

How to Build a Pergola Attached to Your House: Planning Guide

An attached pergola extends your living space outdoors and increases property value. Here is how to plan, design, and build one.

3 min readIntermediate
Modern house with pool and outdoor stairs
Photo: Unsplash

Planning an Attached Pergola

Permits: Most attached structures require planning permission or a building permit — check before starting. UK: attached pergolas covering more than 50% of garden area, or over 2.5m high within 1m of a boundary, require permission. USA: requirements vary by municipality — always check. Germany: most attached structures require Baugenehmigung — check with your Gemeinde.

Ledger attachment: The most critical structural element. The horizontal ledger board that attaches to the house wall must be properly flashed to prevent water ingress. Fix with structural screws into the wall framing (studs/joists), not just cladding. This is where most DIY pergolas fail.

Post sizing: For a pergola up to 3x4m, 100x100mm posts set 450mm deep in concrete are adequate. Larger structures need structural engineering advice.