Before You Start: Turn Off the Water
Locate the isolation valve under the sink and turn clockwise to shut off. If there is no isolation valve, shut off at the main stopcock (usually under the kitchen sink or where the supply enters the house). Turn on the faucet to release any remaining water pressure. Place a towel in the sink to catch any water and to protect the basin if you drop tools.
The Most Common Causes and Fixes
Ball faucet (single handle, rotary) — most common in USA: A worn ball, O-rings, or seats and springs cause drips. Buy a faucet repair kit for your brand (Delta, Moen, Price Pfister). Replace all internal components together — they are cheap and all wear at similar rates. Cartridge faucet (single or double handle): The cartridge wears and allows water past. Remove the handle (Phillips screw under the decorative cap), pull the cartridge, take it to a hardware store for an exact replacement, and reverse the process. Ceramic disc faucet (modern, European standard): Rarely drips — if it does, it usually needs the ceramic disc cassette replaced. Compression faucet (old two-handle type): The simplest repair — replace the rubber washer at the bottom of the valve stem.
When to Call a Plumber
A plumber is needed when: the pipe itself is leaking (not the faucet), there is no isolation valve and you are uncomfortable working on the main supply, there is evidence of corrosion beyond the faucet itself, or the pipe connection to the faucet is leaking. For faucet repairs, the parts and tools cost $20-50 and the repair takes 30-60 minutes for a first-timer. The same repair from a plumber costs $150-350 in the USA.