Where Household Water Goes
Understanding water use distribution helps prioritise savings. In the USA: toilet (26%), clothes washer (21%), shower (17%), taps (19%), leaks (12%), and other (5%). In Germany, the distribution is similar but with lower absolute consumption. The three highest-impact areas: toilet, shower, and leaks. Addressing these three areas delivers the majority of total savings.
High Impact Water Saving Changes
Fix leaks immediately — a dripping tap wastes 15 litres per day; a running toilet wastes 200–400 litres per day. Most leaks are cheap and easy to fix (washer replacement, flapper valve for toilet). Install a low-flow showerhead — reduces shower water use from 12L/min to 5–7L/min with minimal perceived difference. Saves 20,000–30,000 litres per person per year. Dual-flush toilet — reduces flush volume from 9–13 litres to 3/6 litres. Full washing machine loads only — a half-load uses almost the same water as a full load. Cold water for washing produce — use a bowl of cold water rather than running water continuously. Tap off when brushing teeth — saves 6 litres per brushing.
Garden Water Conservation
Garden irrigation accounts for 30–40% of summer household water use in hot climates. Key garden water savings: rainwater harvesting (a 200-litre water butt on every downpipe — payback in one dry summer season), drip irrigation on a timer (delivers water directly to roots with 90% efficiency vs 50% for overhead sprinklers), mulching beds 7–10cm deep (reduces evaporation by 60%), choosing drought-tolerant plants for permanent planting, and watering in the early morning (least evaporation loss).