GroHome
GardeningHome DecorOutdoor LivingHome ImprovementSustainable LivingAll guidesAbout
Home Improvement

How to Remove Popcorn Ceiling: Step-by-Step DIY Guide

Removing a popcorn (textured) ceiling is one of the most searched home improvement DIY projects in the USA. Here is how to do it safely and get a smooth finish.

3 min readBeginner
Formal living room with coffered ceiling and built-in shelves
Photo: Unsplash

The Asbestos Warning — Read This First

Popcorn ceilings installed before 1978 may contain asbestos. This is not a risk if the material is undisturbed, but scraping releases fibres which are hazardous when inhaled. Before scraping any ceiling installed before 1978, purchase an asbestos test kit ($30-40, available at hardware stores) or hire a certified inspector. If asbestos is present, hire a licensed abatement contractor — DIY removal of asbestos-containing material is illegal in most US states and EU countries including Germany.

The Removal Process

1. Protect everything: Remove furniture or cover with plastic sheeting. Cover floors with overlapping plastic — wet popcorn creates a significant mess. Turn off all electrical circuits in the room at the breaker panel. 2. Test for asbestos: As above — confirm safe before proceeding. 3. Wet the ceiling: Use a garden pump sprayer filled with water to wet a section of ceiling thoroughly. Work in 60cm x 60cm sections. Let soak 10-15 minutes — the water loosens the adhesive. 4. Scrape: Use a wide (15-20cm) drywall scraper held nearly flat to the ceiling. Work from one direction. Apply light pressure — aggressive scraping damages the underlying drywall paper. 5. Skim coat: Wet scraping almost always leaves minor surface damage. A skim coat of joint compound (applied with a 30cm drywall knife) gives a smooth base for painting. Sand when dry. Prime and paint.

Carpenter using a mitre saw during a home renovation
Carpenter using a mitre saw during a home renovation. Photo: Unsplash