What Is a Home Energy Audit?
A home energy audit systematically identifies where energy is being wasted in a home — through the fabric (walls, roof, floors, windows), the heating system, appliances, and behavior. A professional audit using thermal imaging and a blower door test (which pressurises the house to find air leakage points) is the most comprehensive approach. A DIY audit, while less precise, identifies the majority of significant issues and can be done in a few hours.
DIY Energy Audit: Step-by-Step
Step 1: Check air leakage: On a cold, windy day, move a stick of incense near: door and window frames, electrical outlets, plumbing penetrations, attic hatch edges, and fireplace dampers. Smoke movement indicates air infiltration. Seal with weatherstripping, acoustic caulk, or expanding foam as appropriate. Step 2: Insulation check: Open the attic hatch and look at insulation depth. If you can see the joists clearly, you need more insulation. Check the depth — minimum recommended is 270mm (UK/Germany) or R-38 (USA). Step 3: Water heater: Is it insulated? Is the thermostat set above 60°C (for Legionella safety) but no higher than 65°C? Is it more than 10 years old? (consider replacement). Step 4: Lighting: Are all bulbs LED? Any remaining halogen or incandescent bulbs should be replaced immediately. Step 5: Appliance audit: Check energy labels. A refrigerator more than 15 years old uses 3-4x more energy than a modern A+++ model.